| Key No. settings |
- Key No. — Shows Key No for new rooms.
- Number of Keys — Set number of new entries in Building Manager Classification System.
- Step Size — Set step size for new entries in Building Manager Classification System.
|
| Room/Zone No. |
Enter room number manually. Alternatively, use the Load button below and select Macro for room number. |
| Room/Zone Name |
Enter room name manually. |
| Macro settings |
- Macro field - Displays syntax of current syntax being loaded.
- Load Default Macro — Opens Select Default Macro dialog from where the default macro is loaded.
Macros available:
- Building / Floor / No
- Floor / No
Select room Name Macro Note: The default macro displayed is dependent of currently selected space object in the treeview. For example, Room n, Building n, Floor n etc.
- Insert — Opens Macro Assistant where you can set level, leading zeros and pick different sequence for macro.
- Test — Macro generated room number is shown in Room/Zone No. field above.
|
| Attribute |
Displays a tabulated list of space parameters; you can set each individually. Few, for example, are as listed below:
- Space Type (ASHRAE 90.1-2004) — shows possible space types from ASHRAE 90.1-2004 definition, will be used in the output ASHRAE 90.1 or ASHRAE 90.1 Benchmark.
- Lighting Power and Density — sets the actual lighting power, and max / actual lighting power densities for a given space. The density value is restricted below 10 units.
- Area, Height — sets dimension of a room.
The Room Height will be used in symbol placement methods ( Place Symbols in Grid, Place Symbols in a Space and Place Symbols by Coverage Radius) taken as default room height. |
| Value |
Displays the value set against each attribute. These are set by selecting one of the options listed or by entering a value in the bottom field for selected attribute. |
| Save |
Accepts the value selected / entered in the field for selected attribute. You must Save each attribute to set the value. |
